Easy-Flo Standards

Model	Estimated Capacity						Trough	Standard Construction Gauge
Size	BPH	CFH	TPH*	MTPH*	FPM	RPM	Type	Head	Tail	Bottom	Side
7 x 13	2000	2500	60	54	126	57
	2500	3125	75	68	158	72	I	10	10	12	12
	3000	3750	90	81	189	86
9 x 17	3000	3750	90	81	95	31
	4000	5000	120	108	126	41	I	10	10	10	10
	5000	6250	150	136	158	51
	6000	7500	180	163	189	61
12 x 17	6000	7500	180	163	142	46
	7000	8750	210	190	165	53.5	I	10	10	10	10
	8000	10,000	240	217	189	61
16 x 17	8000	10,000	240	217	142	46
	9000	11,250	270	244	160	52	I	10	10	10	10
	10,000	12,500	300	272	177	57
16 x 20	10,000	12,500	300	272	154	45	I	7	10	7	10
16 x 20	12,000	15,000	360	326	185	55
20 x 20	10,000	12,500	300	272	123	36	I	7	10	7	10
20 x 20	15,000	18,750	450	408	185	55
26 x 20	15,000	18,750	450	408	142	42	II	7	10	1/4" PL	10
26 x 20	20,000	25,000	600	544	189	56
26 x 26	25,000	31,250	750	680	173	34	II	1/4" PL	7	1/4" PL	10
32 x 26	30,000	37,500	900	816	169	33	II	1/4" PL	7	1/4" PL	10
32 x 32	40,000	50,000	1200	1088	161	26	II	1/4" PL	1/4" PL	3/8" PL	10

All Drag Conveyors are equipped with head, tail, trough, standard top inlet, chain, UHMW Ultra High Molecular Weight plastic - impact and abrasion resistant, and self lubricating. flights, and all assembly bolts. Length is based on center of standard top inlet to center of the discharge.

All shaft mounted drives consist of: Shaft-mounted Class I Steady load not exceeding Motor HP rating and light shock loads during 10 hours a day. Moderate shock loads are allowable if operation is intermittent. or Class II Steady load not exceeding Motor HP rating for over 10 hours a day. Moderate shock loads are allowable during 10 hours a day.reducer with bushings, sheaves and bushings, drive belts (2.0 Safety Factor), belt guard, and motor mount. Motor requirement is 1750 RPM Revolutions Per Minute.

All Drag Conveyor capacities and HP requirements are based upon whole grains @ 15% moisture. Motor requirements and capacity are based upon LEVEL conveyors. The capacity will vary on inclined conveyors and those handling all other materials. Maximum incline using standard equipment is 5°. Conveyors can be inclined to a maximum of 10° using close spaced flights. Riley Equipment is not responsible for the capacity of conveyors on a incline unless approved by our Engineering Department.

Conveyor specifications are listed in the price catalog and provide information on shaft size, bearing type, chain speed, chain strength, steel gauges, etc. Please call for pricing information on conveyor requirements you may have other than our standard specifications. Conveyors are available in galvanized, painted black iron, and stainless steel construction.

Standard Conveyor features include: Heavy-duty pillow block ball bearings through 2 15/16" dia., double roller bearings on larger sizes, hardened rim sprockets, all steel chain, bolted removable bottom and 1/2" thick UHMW flights on all models.

Conveyor sizes 7 x 13 through 20 x 20 use Type I trough with UHMW return rollers. Conveyor sizes 26 x 20 and larger use Type II trough with a return rail system. (Return rails are available as an option on smaller sizes.)

Optional equipment include: By-pass hopper, abrasion resistant bottom and abrasion resistant bolted side liner, intermediate discharge slide gate, discharge transitions, inlet slide gate and conveyor support brackets.

Easy-Flo Drag Conveyor Specifications and Information