|
9 x 9 Inclined Drag Conveyor |
||||||||
|
Capacity BPH Bushels Per Hour - a US measure of volume. |
RPM Revolutions Per Minute |
FPM Feet Per Minute |
Conveyor Wt. |
HP |
Class I Steady load not exceeding Motor HP rating and light shock loads during 10 hours a day. Moderate shock loads are allowable if operation is intermittent. Drive |
Wt. |
Class II Steady load not exceeding Motor HP rating for over 10 hours a day. Moderate shock loads are allowable during 10 hours a day. Drive |
Wt. |
|
500 |
21 |
47 |
1353 |
3 |
090533 |
190 |
090534 |
215 |
|
1000 |
42 |
93 |
1353 |
3 |
091032 |
140 |
091032 |
140 |
|
1500 |
63 |
139 |
1353 |
3 |
091531 |
120 |
091532 |
140 |
|
2000 |
84 |
185 |
1353 |
5 |
092052 |
140 |
092052 |
140 |
The MODEL 9 x 9 conveyor includes the following standard features: 10 ga. Galvanized head section, 10 ga. Galvanized tail section with screw take-up, pillow block bearings, hardened tooth sprockets, trough with all bolted construction has 12 ga. Galvanized sides, 10 ga. Galvanized bottom and 12 ga. HR middle pan, all welded steel chain with heat-treated pins and 30,000 lb. average ultimate strength, and 1/2" thick UHMW Ultra High Molecular Weight plastic - impact and abrasion resistant, and self lubricating. drag flights factory bolted to chain.
|
12 x 12 Inclined Drag Conveyor |
||||||||
|
Capacity BPH |
RPM |
FPM |
Conveyor Wt. |
HP |
Class I Drive |
Wt. |
Class II Drive |
Wt. |
|
2000 |
33 |
101 |
1729 |
5 |
122053 |
190 |
122054 |
215 |
|
2500 |
41 |
126 |
1729 |
5 |
122553 |
190 |
122553 |
190 |
|
3000 |
49 |
151 |
1729 |
5 |
123052 |
140 |
123053 |
190 |
The MODEL 12 x 12 conveyor includes the following standard features: 10 ga. Galvanized head section, 10 ga. Galvanized tail section with screw take-up, pillow block bearings, hardened tooth sprockets, trough with all bolted construction has 10 ga. Galvanized sides, 10 ga. Galvanized bottom and 10 ga. HR middle pan, all welded steel chain with heat-treated pins and 30,000 lb. average ultimate strength, and 1/2" thick UHMW drag flights factory bolted to chain.
|
17 x 17 Inclined Drag Conveyor |
||||||||
|
Capacity BPH |
RPM |
FPM |
Conveyor Wt. |
HP |
Class I Drive |
Wt. |
Class II Drive |
Wt. |
|
4000 |
28 |
99 |
2350 |
7.5 |
174074 |
215 |
174075 |
270 |
|
5000 |
36 |
124 |
2350 |
7.5 |
175074 |
215 |
175075 |
270 |
|
6000 |
43 |
149 |
2350 |
7.5 |
176073 |
190 |
176074 |
215 |
|
7000 |
50 |
174 |
2350 |
10 |
177104 |
215 |
177105 |
270 |
The MODEL 17 x 17 conveyor includes the following standard features: 10 ga. Galvanized head section, 10 ga. Galvanized tail section with screw take-up, pillow block bearings, hardened tooth sprockets, trough with all bolted construction has 10 ga. Galvanized sides, 7 ga. HR painted steel overlapping bottom and 10 ga. HR middle pan, all roller bushed steel chain with all parts heat-treated and 44,000 lb. average ultimate strength, and 1/2" thick UHMW drag flights factory bolted to chain.
|
24 x 20 Inclined Drag Conveyor |
||||||||
|
Capacity BPH |
RPM |
FPM |
Conveyor Wt. |
HP |
Class I Drive |
Wt. |
Class II Drive |
Wt. |
|
7000 |
21 |
106 |
4124 |
10 |
247105 |
270 |
247106 |
350 |
|
8000 |
24 |
121 |
4124 |
15 |
248156 |
350 |
248157 |
550 |
|
9000 |
27 |
136 |
4124 |
15 |
249156 |
350 |
249157 |
550 |
|
10000 |
30 |
152 |
4124 |
15 |
241156 |
350 |
241156 |
350 |
The MODEL 24 x 20 conveyor includes the following standard features: 7 ga. painted head section, 7 ga. painted tail section with screw take-up, pillow block bearings, hardened tooth sprockets, trough with all bolted construction has 10 ga. Galvanized sides, 7 ga. HR painted steel middle pan, and overlapping bottom, all roller bushed steel chain with all parts heat treated and 44,000 lb. average ultimate strength, and 1/2" thick UHMW drag flights factory bolted to chain.
|
32 x 20 Inclined Drag Conveyor |
||||||||
|
Capacity BPH |
RPM |
FPM |
Conveyor Wt. |
HP |
Class I Drive |
Wt. |
Class II Drive |
Wt. |
|
10000 |
22 |
110 |
5185 |
15 |
321006 |
350 |
321007 |
550 |
|
12500 |
28 |
138 |
5185 |
15 |
321256 |
350 |
321256 |
350 |
|
15000 |
33 |
165 |
5185 |
20 |
321506 |
350 |
321507 |
550 |
The MODEL 32 x 20 conveyor includes the following standard features: 7 ga. painted head section, 7 ga. painted tail section with screw take-up, pillow block bearings, hardened tooth sprockets, trough with all bolted construction has 10 ga. Galvanized sides, 7 ga. HR painted steel middle pan, and overlapping bottom, double row of all roller bushed steel chain with all parts heat treated and 44,000 lb. average ultimate strength, and 1/2" thick UHMW drag flights factory bolted to chain.
ALL PRICES AND ALL PRICES AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
Riley Equipment, Inc. - Vincennes, IN
74 -6/02