Saturn II

Saturn - Class I Steady load not exceeding Motor HP rating and light shock loads during 10 hours a day. Moderate shock loads are allowable if operation is intermittent. Drive at 64 RPM Steady load not exceeding Motor HP rating and light shock loads during 10 hours a day. Moderate shock loads are allowable if operation is intermittent.
HP	Part Number	Wt.
15	SA15425	165
20	SA20525	217
25	SA25525	217
30	SA30625	294
40	SA40625	294
50	SA50725	466
60	SA60725F	476
Saturn - Class II Steady load not exceeding Motor HP rating for over 10 hours a day. Moderate shock loads are allowable during 10 hours a day. Drive at 64 RPM
15	SA15525	217
20	SA20625	294
25	SA25625	294
30	SA30625	294
40	SA40725	466
50	SA50825	690
60	SA60825	690

DRIVE PRICES INCLUDE: Reducer, belts, sheaves, bushings, belt guard and fan cooler (F) where required, less motor.

BPH Bushels Per Hour - a US measure of volume.	CFH Cubic Feet per Hour, equal to 0.02832 cubic meter.	TPH Tons per Hour	MTPH Metric Tons per Hour
7000	8750	210	190

603 FPM Feet Per Minute belt speed, 64 pulley RPM
13 x 7 plastic buckets on 9" centers, with bucket bolts.
14" wide pre-punched PVC Polyvinylchloride belt, 350 PIW Pounds per Inch Width, a standard measure of the strength of belting. through 140’, 450 PIW on taller elevators.
12 ga. Head section with Dodge SCM pillow block ball bearings through 2 15/16” dia., Dodge S2000 double roller bearings on larger sizes, bearing jacking bolts, 36" diameter drum head pulley with slide lagging, throat baffle, inspection door at discharge, lagging inspection door, two-piece bonnet, 1/4” expanded metal backed urethane lined head and bonnet, and motor mount.
17" wide x 11" deep 14 ga. Galvanized dual legging. Above 150’ legging is 12 ga. bolted. Inspection door section with full width x 4' tall openings on front and back side.
10 ga. three-piece sides, bolted boot section with 2 7/16" diameter Dodge SCM pillow block ball bearings, screw take-up, 36" diameter drum boot pulley, inspection door, two clean-out slides, and one boot hopper.

Prices below added to base leg price.

Accessories	Wt.
Service Platform	704
Distributor Platform	318
Intermediate Platform	140
Head Explosion Vent	44
Atmospheric Vent	8
Extra Boot Hopper	42
Guy Bracket	22
12 Ga. Galvanized Legging	15/ft
Gravity Boot Take-up	320
Winged Boot Pulley	-
Self Cleaning Boot
14 Ga. Non Std. Discharge Height	46/ft
2 15/16” Roller Head Bearings	40
1/4" Urethane Lined Discharge Transition To 12" Dia.	66
1/4" Urethane Lined Discharge Transition To 14" Dia.	70
Discharge Transition To 12" Dia.	43

Saturn II Galvanized Bucket Elevator