Neptune II
Galvanized Bucket Elevator

Height

HP

Head Shaft

Wt.

30

10

2 7/16

3598

35

10

2 7/16

3797

40

10

2 7/16

3997

45

15

2 15/16

4249

50

15

2 15/16

4460

55

15

2 15/16

4662

60

15

2 15/16

4903

65

20

2 15/16

5155

70

20

2 15/16

5356

75

20

2 15/16

5558

80

20

2 15/16

5809

85

20

2 15/16

6060

90

25

3 7/16

6261

95

25

3 7/16

6513

100

25

3 7/16

6714

105

25

3 7/16

6966

110

25

3 7/16

7167

115

30

3 7/16

7414

120

30

3 7/16

7620

125

30

 3 7/16

7867

130

30

3 7/16

8070

135

30

3 7/16

8320

140

40

3 15/16

8557

145

40

3 15/16

8860

150

40

3 15/16

9064

155

40

3 15/16

11292

160

40

3 15/16

11562

165

40

3 15/16

11835

170

40

3 15/16

12103

175

40

3 15/16

12372

180

40

3 15/16

12644

185

40

3 15/16

12911

190

40

3 15/16

13180

195

40

3 15/16

13452

200

40

3 15/16

13718

 

Neptune - Class I Steady load not exceeding Motor HP rating and light shock loads during 10 hours a day. Moderate shock loads are allowable if operation is intermittent. Drive at 65 RPM Revolutions Per Minute

HP

 Part Number

Wt.

10

VN10325

137

15

VN15425

165

20

VN20525

217

25

VN25525

217

30

VN30625

294

40

VN40625

294

Neptune - Class II Steady load not exceeding Motor HP rating for over 10 hours a day. Moderate shock loads are allowable during 10 hours a day. Drive at 65 RPM Revolutions Per Minute

10

VN10425

165

15

VN15525

217

20

VN20625

294

25

VN25625

294

30

VN30625

294

40

VN40725

466

DRIVE PRICES INCLUDE: Reducer, belts, sheaves, bushings, belt guard and fan cooler (F) where required, less motor.

 
CAPACITY

BPH Bushels Per Hour - a US measure of volume.

CFH Cubic Feet per Hour, equal to 0.02832 cubic meter.

TPH Tons per Hour

MTPH Metric Tons per Hour

4750

5938

142

129

STANDARD FEATURES:

  • 510 FPM Feet Per Minute belt speed, 65 pulley RPM

  • 13 x 6 plastic buckets on 8" centers, with bucket bolts.

  • 14" wide pre-punched PVC Polyvinylchloride belt, 250 PIW Pounds per Inch Width, a standard measure of the strength of belting. through 135, 350 PIW on taller elevators.

  • 12 ga. Head section with Dodge SCM pillow block ball bearings through 2 15/16 dia., Dodge S2000 double roller bearings on larger sizes, bearing jacking bolts, 30" diameter drum head pulley with slide lagging, throat baffle, inspection door at discharge, lagging inspection door, two-piece bonnet, 10 ga. steel liner at wear points, and motor mount.

  • 17" wide x 10" deep 14 ga. Galvanized dual legging.  Above 150 legging is 12 ga. bolted. Inspection door section with full width x 4' tall openings on front and back side.

  • 10 ga. three-piece sides, bolted boot section with 1 15/16" diameter Dodge SCM pillow block ball bearings, screw take-up, 30" diameter drum boot pulley, inspection door, two clean-out slides, and one boot hopper.

 

Prices below added to base leg price.

Accessories

Wt.

Service Platform

659

Distributor Platform

310

Intermediate Platform

140

1/4 Urethane Lined Head

24

Head Explosion Vent

44

Atmospheric Vent

8

Extra Boot Hopper

36

Guy Bracket

19

12 Ga. Galvanized Legging

14/ft

Gravity Boot Take-up

280

Winged Boot Pulley

66

Boot Clean Out Pan

77

Self Cleaning Boot

 

14 Ga. Non Std. Discharge Height

45/ft

2 7/16" Roller Head Bearings

26

2 15/16 Roller Head Bearings

40

1/4" Urethane Lined Discharge Transition To 12" Dia.

 

63

Discharge Transition To 10" Dia.

43

Discharge Transition To 12" Dia.

46

 

 

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

Riley Equipment, Inc. - Vincennes, IN

14 - 06/01