Neptune I
Galvanized Bucket Elevator

Height

HP

Head Shaft

Wt.

30

10

2 7/16

3567

35

10

2 7/16

3766

40

10

2 7/16

3964

45

15

2 15/16

4214

50

15

2 15/16

4413

55

15

2 15/16

4663

60

15

2 15/16

4862

65

15

2 15/16

5112

70

20

2 15/16

5311

75

20

2 15/16

5561

80

20

2 15/16

5757

85

20

2 15/16

6010

90

20

2 15/16

6209

95

20

2 15/16

6454

100

25

3 7/16

6653

105

25

3 7/16

6898

110

25

3 7/16

7102

115

25

3 7/16

7347

120

25

3 7/16

7546

125

25

 3 7/16

7791

130

30

3 7/16

7990

135

30

3 7/16

8235

140

30

3 7/16

8439

145

30

3 7/16

8689

150

30

3 7/16

8888

155

30

3 7/16

11116

160

30

3 7/16

11385

165

40

3 15/16

11653

170

40

3 15/16

11922

175

40

3 15/16

12192

180

40

3 15/16

12472

185

40

3 15/16

12724

190

40

3 15/16

12996

195

40

3 15/16

13263

200

40

3 15/16

13528

 

Neptune - Class I Steady load not exceeding Motor HP rating and light shock loads during 10 hours a day. Moderate shock loads are allowable if operation is intermittent. Drive at 65 RPM Revolutions Per Minute

HP

 Part Number

Wt.

10

VN10325

137

15

VN15425

165

20

VN20525

217

25

VN25525

217

30

VN30625

294

40

VN40625

294

Neptune - Class II Steady load not exceeding Motor HP rating for over 10 hours a day. Moderate shock loads are allowable during 10 hours a day. Drive at 65 RPM

10

VN10425

165

15

VN15525

217

20

VN20625

294

25

VN25625

294

30

VN30625

294

40

VN40725

466

DRIVE PRICES INCLUDE: Reducer, belts, sheaves, bushings, belt guard and fan cooler (F) where required, less motor.
CAPACITY

BPH Bushels Per Hour - a US measure of volume.

CFH Cubic Feet per Hour, equal to 0.02832 cubic meter.

TPH Tons per Hour

MTPH Metric Tons per Hour

4350

5438

130

118

STANDARD FEATURES:

  • 510 FPM Feet Per Minute belt speed, 65 pulley RPM

  • 12 x 6 plastic buckets on 8" centers, with bucket bolts.

  • 13" wide pre-punched PVC Polyvinylchloride belt, 250 PIW through 160, 350 PIW Pounds per Inch Width, a standard measure of the strength of belting. on taller elevators.

  • 12 ga. Head section with Dodge SCM pillow block ball bearings through 2 15/16 dia., Dodge S2000 double roller bearings on larger sizes, bearing jacking bolts, 30" diameter drum head pulley with slide lagging, throat baffle, inspection door at discharge, lagging inspection door, two-piece bonnet, 10 ga. steel liner at wear points, and motor mount.

  • 17" wide x 10" deep 14 ga. Galvanized dual legging.  Above 150 legging is 12 ga. bolted. Inspection door section with full width x 4' tall openings on front and back side.

  • 10 ga. three-piece sides, bolted boot section with 1 15/16" diameter Dodge SCM pillow block ball bearings, screw take-up, 30" diameter drum boot pulley, inspection door, two clean-out slides, and one boot hopper.

 

Prices below added to base leg price.

Accessories

Wt.

Service Platform

659

Distributor Platform

310

Intermediate Platform

140

1/4 Urethane Lined Head

24

Head Explosion Vent

44

Atmospheric Vent

8

Extra Boot Hopper

36

Guy Bracket

19

12 Ga. Galvanized Legging

14/ft

Gravity Boot Take-up

280

Winged Boot Pulley

66

Boot Clean Out Pan

77

Self Cleaning Boot

 

14 Ga. Non Std. Discharge Height

44/ft

2 7/16" Roller Head Bearings

26

2 15/16 Roller Head Bearings

40

1/4" Urethane Lined Discharge Transition To 12" Dia.

 

63

Discharge Transition To 10" Dia.

43

Discharge Transition To 12" Dia.

46

 

 

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

Riley Equipment, Inc. - Vincennes, IN

13 - 06/01