Mercury II

For heights above 130 Ft. consult the engineering department.

Mercury - Class I Steady load not exceeding Motor HP rating and light shock loads during 10 hours a day. Moderate shock loads are allowable if operation is intermittent. Drive at 113 RPM Steady load not exceeding Motor HP rating and light shock loads during 10 hours a day. Moderate shock loads are allowable if operation is intermittent.
HP	Part Number	Wt.
2	ME02115	82
3	ME03115	82
5	ME05115	82
7.5	ME07215	116
Mercury - Class II Steady load not exceeding Motor HP rating for over 10 hours a day. Moderate shock loads are allowable during 10 hours a day. Drive at 113 RPM
2	ME02115	82
3	ME03115	82
5	ME05215	116
7.5	ME07215	116

DRIVE PRICES INCLUDE: Reducer, belts, sheaves, bushings, belt guard and fan cooler (F) where required, less motor.

BPH Bushels Per Hour - a US measure of volume.	CFH Cubic Feet per Hour, equal to 0.02832 cubic meter.	TPH Tons per Hour	MTPH Metric Tons per Hour
1350	1688	40	37

326 FPM Feet Per Minute belt speed, 113 pulley RPM
6 x 5 plastic buckets on 6" centers, with bucket bolts 7" wide pre-punched PVC Polyvinylchloride belt, 250 PIW Pounds per Inch Width, a standard measure of the strength of belting.
14 ga. Head section with Dodge SCM pillow block ball bearings, 11" diameter head pulley with slide lagging, throat baffle,
lagging inspection door, inspection door at discharge, one-piece bonnet, 10 ga. steel liner at wear points, and motor mount.
9" wide x 8" deep 16 ga. Galvanized dual legging. Inspection door section with full width x 4' tall openings on front and back side.
12 ga. one-piece sides, bolted boot section with 1 7/16" diameter Dodge SCM pillow block ball bearings, screw take-up, 11" diameter boot pulley, two clean-out slides, and one boot hopper.

Prices below added to base leg price.

Accessories	Wt.
Service Platform	483
Distributor Platform	288
Intermediate Platform	140
1/4” Urethane Lined Head	12
Head Explosion Vent	38
Atmospheric Vent	8
Extra Boot Hopper	21
Dump Hopper	37
Guy Bracket	11
Winged Boot Pulley	20
Boot Clean Out Pan	40
16 Ga. Non Std. Discharge Height	24/ft
1 7/16" Roller Head Bearings	14
1 15/16" Roller Head Bearings	21
2 3/16" Roller Head Bearings	24
1/4" Urethane Lined Discharge Transition To 6" Dia.	28
Discharge Transition To 6" Dia.	15

Mercury II Galvanized Bucket Elevator