Jupiter III

Jupiter - Class Steady load not exceeding Motor HP rating and light shock loads during 10 hours a day. Moderate shock loads are allowable if operation is intermittent.I Steady load not exceeding Motor HP rating and light shock loads during 10 hours a day. Moderate shock loads are allowable if operation is intermittent. Drive at 60 RPM Revolutions Per Minute
HP	Part Number	Wt.
15	JU15425	165
20	JU20525	217
25	JU25525	217
30	JU30625	294
40	JU40625	294
50	JU50725	466
60	JU60825	690
75	JU75825	690
Jupiter - Class II Steady load not exceeding Motor HP rating for over 10 hours a day. Moderate shock loads are allowable during 10 hours a day. Drive at 60 RPM
15	JU15525	217
20	JU20625	294
25	JU25625	294
30	JU30725	466
40	JU40725	466
50	JU50825	690
60	JU60825	690
75	JU75926	750

DRIVE PRICES INCLUDE: Reducer, belts, sheaves, bushings, belt guard and fan cooler (F) where required, less motor.

BPH Bushels Per Hour - a US measure of volume.	CFH Cubic Feet per Hour, equal to 0.02832 cubic meter.	TPH Tons per Hour	MTPH Metric Tons per Hour
9300	11625	279	253

660 FPM Feet Per Minute belt speed, 60 pulley RPM
16 x 7 plastic buckets on 9" centers, with bucket bolts
17" wide pre-punched PVC Polyvinylchloride belt, 350 PIW Pounds per Inch Width, a standard measure of the strength of belting. through 130', 450 PIW on taller elevators
12 ga. Head section with Dodge SCM pillow block ball bearings through 2 15/16” dia., Dodge S2000 double roller bearings on larger sizes, bearing jacking bolts, 42" diameter drum head pulley with slide lagging, throat baffle, inspection door at discharge, lagging inspection door, two-piece bonnet, 1/4” expanded metal backed urethane lined head and bonnet, and motor mount.
21" wide x 12" deep 14 ga. Galvanized dual legging with loose tie-frame. Above 150’ legging is 12 ga. bolted. Inspection door section with full width x 4' tall openings on front and back side.
10 ga. three-piece sides, bolted boot section with 2 7/16" diameter Dodge SCM pillow block ball bearings, screw take-up, 42" diameter drum boot pulley, inspection door, two clean-out slides, and one boot hopper.

Prices below added to base leg price.

Accessories	Wt.
Service Platform	812
Distributor Platform	318
Intermediate Platform	140
Head Explosion Vent	47
Atmospheric Vent	8
Extra Boot Hopper	65
Guy Bracket	27
12 Ga. Galvanized Legging	17/ft
Gravity Boot Take-up	360
Winged Boot Pulley	73
Self Cleaning Boot
14 Ga. Non Std. Discharge Height	57ft
2 15/16” Roller Head Bearings	40
1/4" Urethane Lined Discharge Transition To 14" Dia.	105
1/4" Urethane Lined Discharge Transition To 16" Dia.	110
Discharge Transition To 14" Dia.	74

Jupiter III Galvanized Bucket Elevator