Accessories

DURA-SPLICE

Durable Belt Fastener with "One Size Fits All" belts and pulleys. Each splice set joins a 2" wide belt area.

ELEVATOR LEGGING EXPLOSION RELIEF PANELS

Relief panels release pressure from possible explosion. Safety chain prevents panel from falling. Each set includes four relief panels.

ELEVATOR BELT SPEED MONITOR

The speed monitor mounts to the elevator boot shaft to detect slowdown in belt speed, indicating a plug situation. An alarm is sounded and/or the leg is shut down automatically. Available in dust-tight and explosion proof models, less control cable and alarms.

LOCK WASHERS, FLAT WASHERS & NUTS

SIZE

1" LONG

1¼" LONG

1½" LONG

1¾" LONG

2" LONG

WT.

WT.

WT.

WT.

WT.

BOX 100-1/4"

3.2

3.4

3.7

---

---

BOX 100-5/16"

5.2

5.7

6.2

6.5

6.8

ELEVATOR BOOT HOPPER MAGNET

High intensity strength magnet is mounted in elevator boot hopper to remove tramp metal. Quick release clamps are used for easy cleaning. Prices are available upon request.

ELEVATOR BELTING

PVC Polyvinylchloride belting is available from stock for widths of 7", 10", 11", 13" and 14". Other widths of PVC as well as rubber belts are available. Prices of belting and hole punching are available upon request.

ELEVATOR BUCKETS

Elevator buckets are available in polyethylene and steel. Prices are available upon request. Specifications required are length, width, number and spacing of holes and hole size.

URETHANE SHEET

High quality urethane sheet is stocked in 4 Ft. x 10 Ft. x 1/4" thickness with expanded metal backing. Prices are available upon request.

MOTORS

Motors up to 150 HP are available from stock. Motors are 1800 RPM Revolutions Per Minute 60 Hz. and 1450 RPM 50 Hz,  three phase. Enclosures are TEFC Totally enclosed, fan cooled (IP54 min.) or Explosion Proof As defined by the National Electrical Code (latest edition). Is divided into Class I (gasses and vapors) Groups A, B, C, and D and Class II (dusts) Groups E, F, and G.Class II, Group G Contains the National Electrical Code provisions for electrical installations which may contain flour, grain, or similar dust.. For specifications, go to Motors.

BOOT SHOVEL POCKET

A boot shovel pocket is available on most bucket elevators. The shovel pocket has a hinged cover and a grate over the opening. The shovel pocket is located on the down leg side. Prices are available upon request.

PULLEYS

Replacement elevator and conveyor pulleys are available in various types of construction; single disc, drum and winged. Specifications required are diameter, face width, shaft size, and crowned or flat face. Prices are available upon request.

GRAVITY TAKE-UP BOOT

Gravity take-up for automatic belt tension is available on the Mars series through the Jupiter series bucket elevators; and standard on all Galaxy models. Included is a weight box and belt alignment bolts for tracking the elevator belt. See the accessory list for prices.

SELF CLEANING BOOT

Gravity take-up for automatic belt tension. Self cleaning style holds close clearance between boot bottom and cups at all times. Winged style pulley with shaft mounted on pillow block bearings. Please call the Engineering Department for specifications and pricing.

BUCKET ELEVATOR MACHINERY ARM

The machinery arm mounts to the head platform. The maximum lifting weight is 750 pounds. Please call the Engineering Department for specifications and pricing.